lang
EN
DE
HU
VestisAluminium for architecture
VestisAluminium for architecture
The Skin standing seam system in Vestis aluminium
The seaming technique is designed to join sheets and strips that have been previously profiled by overlapping them and folding over the edges. They are anchored to the substructure using concealed clips. This type of technique offers the opportunity to produce multiple decorative solutions.
Roofing
1. The Skin clips, indirect concealed fixings
2. The Skin air, three-dimensional, with wires to prevent the formation of condensate
3. Perforated mesh
4. Wooden installation surface
Façade
1. Seamed façade cladding
2. The Skin clips, indirect concealed fixings
3. The Skin air, three-dimensional, with wire to prevent the formation of condensate
4. Perforated mesh
5. Wooden installation surface
use |
Roofing and facades |
|---|---|
min. slope |
5% |
underlay |
Unfinished fir boards 100 mm X 25 mm OSB wooden panels, thk 25 mm, CLASS 3 |
seam h. |
24 mm |
sizes |
Standard centre distance of standing seams 600, 580, 430 mm, depending on selected metal |
